Reset Password

Welcome to our new website

If you have previously had an account with us, please use the forgotten password link to reset your password here. This does not include the password for our CAT system, your existing password will still work. Thank you.

Testing and Recertification

Fall protection anchors eye bolts and single point anchor

All fall protection systems must be tested and carry a test certificate to comply with UK legislation.

All fall protection systems including eye bolts and single point anchors used for the purpose of fall protection, fall arrest and restraint, must be tested and carry a test certificate to comply with UK legislation.

These procedures are often known as eye bolt testing, safety eye bolt testing, safety system testing and recertification.

Following initial installation, the system(s) must be commissioned and annually inspected and tested by a competent and qualified person to ensure it is in a safe working condition, in accordance with section 12 BS 7883: 2019 Personal Fall Protection Equipment – Anchor Systems – System Design, Installation and Inspection – Code of Practice. If the certification for your system(s) does expire, it is the responsibility of the equipment duty holder to ensure that no one is allowed to use the system(s).

Manufacturer Trained Engineers

Using our manufacturer trained engineers, we provide nationwide coverage to install, service and certify the wide range of fall protection and abseil systems on the market including Latchways, Capital Safety, Sala, Metreel and Soll. Via our comprehensive asset tracking database, existing customers can trust us to manage their annual certification visits in a timely manner and maintain the compliance of their installed safety system(s).

In the event of system failure or non-compliance during the annual test, full reports and guidance on required remedial action will be provided.

To book a free site visit to survey your current safety systems and discuss your requirements please contact our fall protection experts:

Please call us on 0330 390 0822 or email info@arcoservices.co.uk

Testing
  • Guardrails Edge Protection

    Guardrails are designed to completely remove the risk of a fall from height. They act as a physical barrier and mean workers do not need to be trained to use or inspect them, removing the need to wear personal fall protective equipment (FPE).

    More
  • Collective Fall Protection

    Collective fall protection solutions are designed to protect more than one person falling from height. They protect all employees collectively without them needing a harnesses or restrictive working line.

    More
  • Abseil Systems

    Abseiling can provide safe and efficient access for buildings. We can provide an end-to-end service for abseil rails and anchors, from design and installation, through to inspection and certification.

    More
  • Fall Protection Anchor Points

    We can help you select the right type of eyebolt or anchor point for your circumstances and help you maintain compliance with the relevant standards and regulations

    More
  • Testing and Certification

    Using our manufacturer trained engineers, we provide nationwide coverage to install, service and certify the wide range of fall protection and abseil systems on the market

    More
  • Ladder Safety Systems

    Safety when ascending and descending a ladder system remains paramount but also it is important that the worker can complete the work by ascending and descending comfortably and without restrictions.

    More
  • Horizontal and Vertical Lifelines

    It is generally accepted that the starting point when considering all work at height should be the hierarchy of control. Once it’s determined that working at height is essential, the next step is to ensure workers are not exposed to unnecessary risk and that suitable and sufficient means for protection from falls from height are in place such as a fall protection system.

    More
  • Davit Arm Systems

    By providing height and outreach, davits offer a point of attachment that is convenient for its user. Due to the high overturning loads that can be generated by davit systems, it is essential that stability is provided by a base system or socket that is suitable for the task.

    More
  • Our Shop

    You need to know your people have the right kit for the job when working at height, in a confined space or where the working environment demands the use of respiratory equipment. As a truly independent supplier, we’re not tied to any brand and can offer impartial advice and recommendations

    More

Get in contact

Email Us Telephone Call Me Back